Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Brake System: VAG ; Weight [kg]: 1,42 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/8871.html
Diameter [mm]: 180 mm ; Width [mm]: 31 mm ; Brake System: VAG ; Weight [kg]: 1,02 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/8772.html
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Brake System: VAG ; Weight [kg]: 1,36 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/8778.html
Manufacturer Restriction: TRW ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 69,5 mm ; Length [mm]: 119 mm ; Thickness [mm]: 16 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Manufacturer Restriction: VAG ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 50,6 mm ; Length [mm]: 141,8 mm ; Thickness [mm]: 17,3 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Front Axle ; Height [mm]: 69,3 mm ; Width [mm]: 119,1 mm ; Thickness [mm]: 15 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Width [mm]: 87,6 mm ; Height [mm]: 52,9 mm ; Thickness [mm]: 17,2 mm ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Info 2: with brake caliper screws ; Number of screws: 4 ; Brake System: Lucas / TRW ; Inspection Tag: E1 90R-02A0258/0193 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Width [mm]: 87,6 mm ; Height [mm]: 52,9 mm ; Thickness [mm]: 16 mm ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Info 2: with brake caliper screws ; Number of screws: 4 ; Brake System: Lucas / TRW ; Inspection Tag: E1 90R-02A0258/0193 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 3 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 2 ; ArticleState: Normal
Fitting Position: Front Axle ; Inspection Tag: E1-90 R - 011298/022 ; Thickness [mm]: 16 mm ; Length [mm]: 119,2 mm ; Height [mm]: 69,5 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 118,9 mm ; Width [mm]: 69,4 mm ; Thickness [mm]: 15,7 mm ; Brake Lining Backplate Material: Metal ; ArticleState: Normal
Number of Teeth: 120 ; Length 1 [mm]: 1143 mm ; Width 1 [mm]: 30 mm ; Supplementary Article/Info 2: without tensioner pulley damper ; ArticleState: Normal
Number of Teeth: 120 ; Length 1 [mm]: 1143 mm ; Width 1 [mm]: 30 mm ; Supplementary Article/Info 2: with tensioner pulley damper ; ArticleState: Normal
Height 1 [mm]: 69,4 mm ; Brake System: Lucas - Girling ; Width 1 [mm]: 118,9 mm ; Thickness/Strength 1 [mm]: 15,7 mm ; Number of Springs: 4 ; Number of pads: 4 ; Number of threaded bolts: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
Height 1 [mm]: 52,8 mm ; Brake System: Lucas - Girling ; Width 1 [mm]: 87,1 mm ; Thickness/Strength 1 [mm]: 17,3 mm ; Number of Springs: 4 ; Number of pads: 4 ; Number of threaded bolts: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Anti-Squeal Clips: 4
Number of Teeth: 120 ; Length [mm]: 1143 mm ; Width [mm]: 30 mm ; Pulleys contained: 2 ; Supplementary Article/Info 2: with tensioner element ; Supplementary Article/Info 2: with tensioner pulley damper ; ArticleState: Normal
Number of Teeth: 120 ; Length [mm]: 1143 mm ; Width [mm]: 30 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949538
Friction Surface Width [mm]: 40 mm ; Brake Pad: with lining ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/0986487270
Number of Teeth: 120 ; Length [mm]: 1143 mm ; Width [mm]: 30 mm ; Pulleys contained: 2 ; Supplementary Article/Info 2: without tensioner element ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987948165
Number of belts: 1 ; Number of Teeth: 120 ; Width [mm]: 30 mm ; Observe mounting information: ; ArticleState: Normal ; Technical Information: Mit Gürtel Dayco HT
Number of belts: 1 ; Number of Teeth: 120 ; Width [mm]: 30 mm ; Observe mounting information: ; ArticleState: Normal ; Technical Information: Mit Gürtel Dayco HT
Number of belts: 1 ; Number of Teeth: 120 ; Width [mm]: 30 mm ; Observe mounting information: ; ArticleState: Normal ; Technical Information: Mit Gürtel Dayco HT
for article number: S 85 511 ; Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Brake System: VAG ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Brake System: VAG ; Width [mm]: 40 mm ; for article number: H 85 023 ; Diameter [mm]: 200 mm ; Bore Ø [mm]: 19,05 mm ; ArticleState: Article to be discontinued
Number of Teeth: 120 ; Length [mm]: 1143 mm ; Width [mm]: 30 mm ; Pulleys contained: 2 ; Belts: with rounded tooth profile ; Number of belts: 1 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 0,213 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Info 2: with tensioner pulley damper ; Contains more articles than the OE set (Art. No.): 038 198 119B ; Weight [kg]: 1,552 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; Technical Information: Bitte beachten: Technische Information im Anhang
; Technical Information: Passende Kurbelwellenschraube(n) separat erhältlich. Siehe R
ubrik Riemenscheibe Kurbelwelle (Schraubensatz)
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Info 2: with tensioner pulley damper ; Contains more articles than the OE set (Art. No.): 038 198 119 ; Weight [kg]: 1,549 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; Technical Information: Bitte beachten: Technische Information im Anhang
; Technical Information: Passende Kurbelwellenschraube(n) separat erhältlich. Siehe R
ubrik Riemenscheibe Kurbelwelle (Schraubensatz)
Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Brake System: Girling ; Inspection Tag: E990R-01112/055 ; Length [mm]: 119 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Weight [kg]: 1,399 kg ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with screws ; ArticleState: Normal
Width 1 [mm]: 30 mm ; Tooth System: B ; Number of Teeth: 120 ; for article number: TBK161/TBK162/TBK168 ; for article number: TBK170/TBK345/TBK483 ; ArticleState: Normal
Width [mm]: 30 mm ; Number of Teeth: 120 ; Surface: Coated ; Weight [kg]: 1,05 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 40 mm ; Outer diameter [mm]: 200 mm ; Material: Sheet Steel ; Brake Pad: with lining ; Fitting Position: Rear Axle ; Weight [kg]: 1,56 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 141,8 mm ; Fitting Position: Front Axle ; Height [mm]: 51,2 mm ; Height [mm]: 50,6 mm ; Thickness [mm]: 17,3 mm ; Weight [kg]: 0,542 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Weight [kg]: 0,3 kg ; Filter type: In-Line Filter ; Filter type: with water trap ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Surface: Coated ; Weight [kg]: 1,05 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 31 mm ; Width [mm]: 35 mm ; Outer diameter [mm]: 72 mm ; Weight [kg]: 0,68 kg ; ArticleState: Normal ; General Information: für Zahnriemen, Nockenwelle
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 87 mm ; Supplementary Article/Info 2: with screws ; Fitting Position: Rear Axle ; Height [mm]: 52,9 mm ; Thickness [mm]: 17 mm ; Weight [kg]: 1 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Surface: Coated ; Weight [kg]: 1,1 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 35 mm ; Outer diameter [mm]: 72 mm ; Weight [kg]: 0,68 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Surface: Coated ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,18 kg ; Belts: with rounded tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 87 mm ; Fitting Position: Rear Axle ; Height [mm]: 52,9 mm ; Thickness [mm]: 17 mm ; Weight [kg]: 0,941 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Length [mm]: 119 mm ; Supplementary Article/Info 2: with brake caliper screws ; Width [mm]: 70 mm ; WVA Number: 20168 ; Brake System: TRW ; Inspection Tag: R90 Homologated ; Wear Warning Contact: not prepared for wear indicator ; Weight [kg]: 1,4 kg ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/3KeVF4
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Length [mm]: 119 mm ; Supplementary Article/Info 2: with brake caliper screws ; Width [mm]: 69 mm ; WVA Number: 21945 ; Brake System: TRW ; Inspection Tag: R90 Homologated ; Wear Warning Contact: not prepared for wear indicator ; Weight [kg]: 1,5 kg ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/vo9ZB9
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Rear Axle ; Thickness [mm]: 17 mm ; Length [mm]: 87 mm ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Info 2: with brake caliper screws ; Width [mm]: 53 mm ; WVA Number: 20961 ; WVA Number: 23554 ; Brake System: TRW ; Inspection Tag: R90 Homologated ; Wear Warning Contact: not prepared for wear indicator ; Weight [kg]: 1 kg ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/QzAC5P
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Length 1 [mm]: 119 mm ; Thickness/Strength 1 [mm]: 16 mm ; Weight [kg]: 2,25 kg ; Width 1 [mm]: 69 mm ; Specification: DSUNO ; Specification: Racing use only ; ArticleState: Normal
Fitting Position: Front Axle ; Length 1 [mm]: 119 mm ; Thickness/Strength 1 [mm]: 16,2 mm ; Weight [kg]: 1,5 kg ; Width 1 [mm]: 70 mm ; Specification: DS2500 ; Specification: Track day use ; ArticleState: Normal
Fitting Position: Front Axle ; Length 1 [mm]: 119 mm ; Thickness/Strength 1 [mm]: 16,2 mm ; Weight [kg]: 1,5 kg ; Width 1 [mm]: 70 mm ; Specification: DS3000 ; Specification: Racing use only ; ArticleState: Normal
Fitting Position: Front Axle ; Length 1 [mm]: 119 mm ; Thickness/Strength 1 [mm]: 16 mm ; Weight [kg]: 1,5 kg ; Width 1 [mm]: 69 mm ; Specification: DS2500 ; Specification: Track day use ; ArticleState: Normal
Fitting Position: Rear Axle ; Length 1 [mm]: 87,4 mm ; Thickness/Strength 1 [mm]: 16 mm ; Weight [kg]: 1 kg ; Width 1 [mm]: 52,9 mm ; Specification: DS1.11 ; Specification: Racing use only ; ArticleState: Normal
Manufacturer Restriction: TRW ; Length [mm]: 87 mm ; Height [mm]: 52,9 mm ; Thickness [mm]: 17 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Info 2: with brake caliper screws ; Brake System: not for carbon-ceramic brake discs ; Brake System: only in conjunction with steel brake discs ; ArticleState: on demand
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H8720 ; ArticleState: Normal
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H8720 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 3 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 2 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 2 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 3 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 2 ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 3 ; ArticleState: Normal
Fitting Position: Rear Axle ; Thickness [mm]: 17,2 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: Lucas ; ArticleState: Normal
Thickness [mm]: 16 mm ; Width [mm]: 119 mm ; Weight [kg]: 1,5 kg ; Height 1 [mm]: 69,5 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 4 identical pads all with top springs
Thickness [mm]: 15 mm ; Width [mm]: 87 mm ; Weight [kg]: 1 kg ; Height 1 [mm]: 52,9 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 4 identical pads with top springs
Engine number from: 011 495 ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with nut ; Outer diameter [mm]: 72 mm ; Width [mm]: 35 mm ; ArticleState: in Preparation
Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Brake System: Girling ; Inspection Tag: E990R-01112/055 ; Length [mm]: 119 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Weight [kg]: 1,399 kg ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with screws ; ArticleState: Normal
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; for article number: 06830 ; Brake System: VAG ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Height 1 [mm]: 52,8 mm ; Brake System: Lucas - Girling ; Width 1 [mm]: 87,1 mm ; Thickness/Strength 1 [mm]: 17,3 mm ; Number of Springs: 4 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; for article number: 06830 ; Brake System: VAG ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Width [mm]: 30 mm ; Number of Teeth: 120 ; Driven Units: Driven unit: camshaft ; Driven Units: Driven unit: water pump ; ArticleState: No longer supplied by manufacturer
Length [mm]: 1107 mm ; Width [mm]: 30 mm ; Number of Teeth: 120 ; Driven Units: Driven unit: camshaft ; Driven Units: Driven unit: water pump ; ArticleState: Article to be discontinued
Width [mm]: 30 mm ; Number of Teeth: 120 ; Driven Units: Driven unit: camshaft ; Driven Units: Driven unit: water pump ; ArticleState: No longer supplied by manufacturer
Fitting Position: Rear Axle ; Brakes- / Drive Dynamics Articles: not for ABS ; Braking / Drive Dynamics: for vehicles without ABS ; Chassis number to: 6NXY227489 ; for article number: 1390295 ; ArticleState: Normal
Outer diameter [mm]: 80 mm ; Inlet Ø [mm]: 8 mm ; Outlet Ø [mm]: 8 mm ; Height [mm]: 148 mm ; Supplementary Article/Supplementary Info: with seal ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Width [mm]: 119 mm ; Height [mm]: 69,5 mm ; Brake System: LUCAS ; Weight [kg]: 1,3 kg ; ArticleState: Normal
Fitting Position: Rear Axle ; Thickness [mm]: 17 mm ; Length [mm]: 87 mm ; Height [mm]: 52,9 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: LUCAS ; ArticleState: Normal
Engine number to: 011 494 ; Fitting Position: Upper Left ; Diameter [mm]: 72 mm ; Width [mm]: 31 mm ; Tensioner Pulley Actuation: Hydraulic ; ArticleState: Normal
Fitting Position: Rear Axle ; Length [mm]: 87 mm ; Height [mm]: 53 mm ; Thickness [mm]: 16,6 mm ; Wear Warning Contact: excl. wear warning contact ; Brake System: Lucas ; Specification: ECE R90 APPROVED ; Supplementary Article/Info 2: with brake caliper screws ; Supplementary Article/Info 2: with anti-squeak plate ; Part number of recommended accessories: 109-1211 ; Part number of recommended accessories: 109-1749 ; Part number of recommended accessories: 113-1302X ; ArticleState: Normal
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Thickness [mm]: 4,8 mm ; Supplementary Article/Supplementary Info: with lever ; Part number of recommended accessories: 105-0680 ; ArticleState: Normal
ArticleState: Normal ; Technical Information: High Tenacity-Riemen (HT-Riemen)
aus speziellen teflonbeschichteten PTFE-Gewebe
; Installation Information: Montagehinweis: Stehbolzen zur Befestigung der Spannrolle im
mer ganz in das Gewinde am Motorblock eindrehen.
Nur so ist gewährleistet, dass die Spannrolle korrekt am Mot
orblock aufliegt. Unsachgemäße Montage kann zum Bruch des St
ehbolzens führen!
Fitting Position: Rear Axle ; Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Supplementary Article/Supplementary Info: without spring ; Supplementary Article/Supplementary Info: with lever ; ArticleState: Normal
Engine number from: 011 495 ; Number of Teeth: 120 ; Length [mm]: 1143 mm ; Width [mm]: 30 mm ; Driven Units: Driven unit: camshaft ; Number of belts: 1 ; Pulleys contained: 3 ; ArticleState: Normal
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Supplementary Article/Info 2: with handbrake lever ; Weight [kg]: 1,565 kg ; Packaging length [cm]: 19,8 cm ; Packaging width [cm]: 12,5 cm ; Packaging height [cm]: 8,2 cm ; ArticleState: Normal
Number of Teeth: 120 ; Length 1/ Length 2 [mm]: 1143 mm ; Width 1 [mm]: 30 mm ; ArticleState: Normal ; Technical Information: 1 Gürtel, 1 Spanner, 1 Auto Spanner & 1 Mutter
for brake disc diameter [mm]: 256 ; for PR number: 1ZE мм ; for PR number: 1ZK мм ; for PR number: 1ZJ мм ; Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Length [mm]: 119 mm ; Width [mm]: 69 mm ; WVA Number: 21945 ; Brake System: TRW ; ArticleState: Normal
Number of Teeth: 120 ; Pulleys contained: 3 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Pulleys contained: 2 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Pulleys contained: 3 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Pulleys contained: 2 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Heat resistant: ; Packaging length [cm]: 20,8 cm ; Packaging width [cm]: 3,2 cm ; Packaging height [cm]: 23 cm ; ArticleState: Normal
Width [mm]: 30 mm ; Number of Teeth: 120 ; Driven Units: Driven unit: camshaft ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Width [mm]: 30 mm ; Number of Teeth: 120 ; Driven Units: Driven unit: camshaft ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Width [mm]: 30 mm ; Number of Teeth: 120 ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Info 2: with tensioner pulley damper ; ArticleState: Normal
Brake System: Lucas - Girling ; Width [mm]: 87,2 mm ; Height [mm]: 53,1 mm ; Thickness [mm]: 17 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Brake System: Lucas - Girling ; Width [mm]: 118,7 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Fitting Position: Rear Axle ; Brake System: for vehicles with disc brakes on the rear axle ; for PR number: 1KQ,1KF мм ; for PR number: 2EJ мм ; Width [mm]: 87 mm ; Height [mm]: 53 mm ; Thickness [mm]: 17,2 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Info 2: with brake caliper screws ; WVA Number: 23554 ; Brake System: Lucas ; ArticleState: Normal
Fitting Position: Front Axle ; for PR number: 1ZK,1ZE,1ZJ мм ; Width [mm]: 119,2 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16,2 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Info 2: with brake caliper screws ; WVA Number: 21945 ; Brake System: Lucas ; ArticleState: Normal
Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Brake System: Girling ; Inspection Tag: E990R-01112/055 ; Length [mm]: 119 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Weight [kg]: 1,399 kg ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with screws ; ArticleState: Normal
Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Brake System: Girling ; Inspection Tag: E990R-01112/055 ; Length [mm]: 119 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Weight [kg]: 1,399 kg ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with screws ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; for components see parts list: ; Supplementary Article/Info 2: with tensioner pulley damper ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with nut ; ArticleState: Normal
Outer diameter [mm]: 72 mm ; Width [mm]: 35 mm ; Supplementary Article/Info 2: with nut ; Supplementary Article/Supplementary Info: with add-on material ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with nut ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with nut ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with nut ; ArticleState: Normal
Outer diameter [mm]: 72 mm ; Width [mm]: 35 mm ; Supplementary Article/Info 2: with nut ; Supplementary Article/Supplementary Info: with add-on material ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Info 2: with tensioner pulley damper ; Belts: with rounded tooth profile ; Part number of the recommended special tools: VKN 1000 ; ArticleState: Normal ; General Information: Bitte beachten: Technik-Info im Anhang (Service Information)
; General Information: Spannrollensatz mit Zubehör
; General Information: Beinhaltet Dämpfer
Number of Teeth: 120 ; Width [mm]: 30 mm ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: SKF-Empfehlung: Spannrollensatz
Number of Teeth: 120 ; Width [mm]: 30 mm ; Belts: with rounded tooth profile ; Part number of the recommended special tools: VKN 1000 ; ArticleState: Normal ; General Information: Bitte beachten: Technik-Info im Anhang (Service Information)
; General Information: Spannrollensatz
Supplementary Article/Info 2: with tensioner pulley damper ; Part number of the recommended special tools: VKN 1000 ; ArticleState: Normal ; General Information: Bitte beachten: Technik-Info im Anhang (Service Information)
; General Information: Spannrollensatz mit Zubehör
; General Information: Beinhaltet Dämpfer
Number of Teeth: 120 ; Width [mm]: 30 mm ; Belts: with rounded tooth profile ; Part number of the recommended special tools: VKN 1000 ; ArticleState: Normal ; General Information: Bitte beachten: Technik-Info im Anhang (Service Information)
; General Information: Spannrollensatz
Number of Teeth 1: 120 ; Number of belts: 1 ; Weight [g]: 1595 g ; Width 1 [mm]: 30 mm ; ArticleState: Normal ; Technical Information: NTN Inside
; Technical Information: Anzahl der Spannrollen:3
Number of Teeth 1: 120 ; Number of belts: 1 ; Weight [g]: 1615 g ; Width 1 [mm]: 30 mm ; ArticleState: Normal ; Technical Information: NTN Inside
; Technical Information: Anzahl der Spannrollen:3
Number of Teeth 1: 120 ; Number of belts: 1 ; Weight [g]: 1250 g ; Width 1 [mm]: 30 mm ; ArticleState: Normal ; Technical Information: NTN Inside
; Technical Information: Anzahl der Spannrollen:2
Width [mm]: 40 mm ; Outer diameter [mm]: 200 mm ; Material: Sheet Steel ; Brake Pad: with lining ; Fitting Position: Rear Axle ; Weight [kg]: 1,56 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 31 mm ; Width [mm]: 35 mm ; Outer diameter [mm]: 72 mm ; Weight [kg]: 0,68 kg ; ArticleState: Normal ; General Information: für Zahnriemen, Nockenwelle
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 870 mm ; Supplementary Article/Info 2: with screws ; Fitting Position: Rear Axle ; Height [mm]: 52,9 mm ; Thickness [mm]: 17 mm ; Weight [kg]: 1 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Weight [kg]: 1,05 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 35 mm ; Outer diameter [mm]: 72 mm ; Weight [kg]: 0,68 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 87 mm ; Fitting Position: Rear Axle ; Height [mm]: 52,9 mm ; Thickness [mm]: 17 mm ; Weight [kg]: 0,941 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Weight [kg]: 1,05 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,15 kg ; Belts: with rounded tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 141,8 mm ; Fitting Position: Front Axle ; Height [mm]: 51,2 mm ; Height [mm]: 50,6 mm ; Thickness [mm]: 17,3 mm ; Weight [kg]: 0,542 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Number of Teeth: 120 ; Surface: Coated ; Weight [kg]: 1,1 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Weight [kg]: 0,3 kg ; Filter type: In-Line Filter ; Filter type: with water trap ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Supplementary Article/Info 2: with handbrake lever ; Weight [kg]: 1,501 kg ; Packaging length [cm]: 19,8 cm ; Packaging width [cm]: 12,5 cm ; Packaging height [cm]: 8,2 cm ; Technical Information Number: 98101 0447 0 4 ; ArticleState: Normal
Supplementary Article/Supplementary Info: with accessories ; Number of pads: 4 ; Fitting Position: Rear Axle ; Thickness [mm]: 17,2 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Number of pads: 4 ; Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: without accessories ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 17,2 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: without accessories ; Number of pads: 4 ; ArticleState: Normal
Diameter [mm]: 72 mm ; Width [mm]: 35 mm ; Weight [kg]: 0,68 kg ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-0467
Fitting Position: Rear Axle ; Diameter [mm]: 200 mm ; Width [mm]: 40 mm ; Alternatively: ; Supplementary Article/Supplementary Info: with lever ; Brake Pad: with lining ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-0450-1
Fitting Position: Front Axle ; Thickness [mm]: 16 mm ; Length [mm]: 119 mm ; Width [mm]: 119 mm ; Height [mm]: 69,5 mm ; Wear Warning Contact: excl. wear warning contact ; Brake System: LUCAS ; for brake disc thickness [mm]: 20 mm ; for brake disc diameter [mm]: 256 mm ; for PR number: 1LY,1ZK,1LF ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-8113
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Info 2: with tensioner pulley damper ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-4170
Fitting Position: Rear Axle ; Diameter [mm]: 180 mm ; Width [mm]: 31 mm ; Supplementary Article/Supplementary Info: with lever ; Brake Pad: with lining ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-0452
Height [mm]: 148 mm ; Outer diameter [mm]: 80 mm ; Inlet Ø [mm]: 8 mm ; Outlet Ø [mm]: 8 mm ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V10-8164
Fitting Position: Rear Axle ; Diameter [mm]: 180 mm ; Width [mm]: 31 mm ; Alternatively: ; Supplementary Article/Supplementary Info: with lever ; Brake Pad: with lining ; ArticleState: Article to be discontinued ; General Information:
https://www.autoteile.de/produkt/V10-0452-1
Manufacturer Restriction: TRW ; Thickness [mm]: 17 mm ; Length [mm]: 87,2 mm ; Height [mm]: 52,5 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Manufacturer Restriction: TRW ; Thickness [mm]: 15,2 mm ; Length [mm]: 118,9 mm ; Height [mm]: 69,4 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 0,213 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal ; General Information: Contitech CT1028
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 1,1 kg ; Required quantity: 1 ; Surface: Coated ; ArticleState: Normal ; General Information: Swag 30921726
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 1,549 kg ; Supplementary Article/Info 2: with tensioner pulley damper ; Contains more articles than the OE set (Art. No.): 038 198 119 ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1028K2
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 3 ; ArticleState: Normal ; General Information: Ina/luk 530 0177 10
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 0,15 kg ; Required quantity: 1 ; Supplementary Article/Info 2: for camshaft ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: Swag 30919540
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 1,168 kg ; Supplementary Article/Info 2: without tensioner pulley damper ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1028K4
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 1,552 kg ; Supplementary Article/Info 2: with tensioner pulley damper ; Contains more articles than the OE set (Art. No.): 038 198 119B ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1028K1
Number of Teeth: 120 ; Width [mm]: 30 mm ; Weight [kg]: 1,171 kg ; Supplementary Article/Info 2: without tensioner pulley damper ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1028K5
Number of Teeth: 120 ; Width [mm]: 30 mm ; Supplementary Article/Supplementary Info: with add-on material ; Pulleys contained: 2 ; ArticleState: Normal ; General Information: Ina/luk 530 0176 10
Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Brake System: Girling ; Inspection Tag: E990R-01112/055 ; Length [mm]: 119 mm ; Height [mm]: 69,5 mm ; Thickness [mm]: 16 mm ; Weight [kg]: 1,399 kg ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with screws ; ArticleState: Normal
This website uses cookies to enhance your experience, for analytics and enabling third party features. Find out more about cookies by reading our Cookie Policy.
By clicking Accept, you agree to our use of cookies.
Please, learn more about how we process your personal data in our Privacy policy.
ABOUT THE COOKIE POLICY
This Cookie policy explains what cookies are, how we use cookies, how third parties we may collaborate
with may use cookies on the website, your choices regarding Cookies and the further information about Cookies.
WHAT ARE COOKIES
Cookies are files, often including unique identifiers, which are sent by web servers to web browsers, and which may then be sent back to the server each time the browser requests a page from the server.
Cookies can be used by web servers to identity and track users as they navigate different pages on a website, and to identify users returning to a website.
Cookies may be either persistent Cookies or session Cookies. A persistent Cookie consists of a text file sent by a web server to a web browser, which will be stored by the browser and will remain valid until its set expiry date (unless deleted by the user before the expiry date). A session Cookie, on the other hand, will expire at the end of the user session, when the web browser is closed.
HOW WE USE COOKIES
When you use and access the website, we may place a number of Cookies files in your web browser.
We may use the information we obtain from your use of our Cookies for the following purposes:
1. to recognise your computer when you visit the website
2. to track you as you navigate the website, and to enable the use of any e-commerce facilities
3. to improve the website usability
4. to analyse the use of the website
5. to administer the website
6. to personalise the website for you, including targeting advertisements which may be of particular interest to you.
We use both session and persistent Cookies on the Website and we use different types of Cookies to run the website:
a)Essential Cookies. We may use essential cookies to authenticate users and prevent fraudulent use of user accounts.
b)Preferences Cookies. We may use preferences cookies to remember information that changes the way the website behaves or looks, such as the "remember me"; functionality of a registered user or a user\'s language preference.
c)Analytics Cookies. We may use analytics Cookies to track information how the website is used so that we can make improvements. We may also use analytics Cookies to test new advertisements, pages, features or new functionality of the website to see how our users react to them.
THIRD-PARTY COOKIES
In addition to our own Cookies, we may also use various third-parties Cookies to report usage statistics of the website, deliver advertisements on and through the website, etc.
Our advertisers and website providers may send you Cookies. They may use the information they obtain from your use of their Cookies:
1. to track your browser across multiple websites
2. to build a profile of your web surfing
3. to target advertisements which may be of particular interest to you.
BLOCK COOKIES
Most browsers allow you to refuse to accept Cookies. For example:
1. in Internet Explorer you can refuse all cookies by clicking Tools, Internet Options, Privacy and selecting the parameter Block all cookies by means of the slider;
2. in Firefox you can block all cookies by clicking Tools, Options and un-checking Accept Cookies from websites in the Privacy box.
3. in Google Chrome you can adjust your Cookie permissions by clicking Options, Under the hood, Content Settings in the Privacy section. Click on the Cookies tab in the Content Settings.
4. in Safari you can block Cookies by clicking Preferences, selecting the Privacy tab and Block Cookies.
Blocking all Cookies will, however, have a negative impact upon usability of many websites. If you block Cookies, you may not be able to use certain features on the website (log on, access content, use search functions).
DELETE COOKIES
You can also delete Cookies which are already stored on your computer:
1. in Internet Explorer, you must manually delete Cookie files;
2. in Firefox, you can delete Cookies by, first, ensuring that Cookies are to be deleted when you Clear private data (this setting can be changed by clicking Tools, Options and Settings in the Private Data box) and then clicking Clear private data in the Tools menu.
3. in Google Chrome you can adjust your Cookie permissions by clicking Options, Under the hood, Content Settings in the Privacy section. Click on the Cookies tab in the Content Settings.
4. in Safari you can delete cookies by clicking Preferences, selecting the Privacy tab and Remove All Website Data.
Obviously, doing this may have a negative impact on the usability of many websites.
COOKIES PREFERENCES
If you want to delete Cookies or set your web browser to delete or refuse to accept cookies, please visit the Help pages of your web browser.
Please note that if you delete Cookies or refuse to accept them, you might not be able to use all of the features we offer, you may not be able to store your preferences, and some of our webpages might not display properly.
Cookies are disabled in the browser. It can lead to failures or incorrect work of the website. Please, allow using cookie files for this website (or the browser as a whole) following the browser policy.